Is there a difference between sublimation paper and thermal transfer paper?

Among them, the WET300/50 hydraulic piston pump has a grouting capacity of 157m and the average grouting efficiency is increased by 22%. A supervision of the team leader's sampling. Laser laser film self-adhesive label Multi-color product label universal label paper, suitable for high-standard information labels for stationery and decorations. The closed cycle of white water recovery, closed cycle and "zero discharge" white water refers to the method in which the white water discharged from the paper machine is directly recovered by the white water recovery equipment and then returned to the paper machine system for use. Therefore, the full closure is not the use of water, the extreme use of paper machine white water. It uses the vacuum generated by the filtrate water leg tube as the filter driving force, and the net height of the water leg is generally 5-7 meters. For the grassroots staff, paper companies, schools, the public and other different groups, the POPs science knowledge, conventions, project conditions and advanced technologies, the eco-environment department carried out extensive publicity and training activities on different occasions. The public and the professionals were involved in the supervision of the work of reducing emissions and received good social effects. 80*80 series of printing paper. The cooler is corroded and damaged, causing oil and water to mix. How long is the shelf life of thermal paper? The precipitation method is to separate the fibers and the filler by means of sedimentation, so as to recover the fibers and fillers and clarify the white water. 2 Initial equipment configuration scheme The sewage treatment plant uses a 600m2 programmable diaphragm filter press for sludge dewatering and concentration treatment, and the maximum filtration pressure is 6MPa. The low-pressure feed pump uses a screw pump with a flow rate of 120 m3/h, an operating pressure of 6 MPa, and a motor power of 37 kW.

The second stage uses a floating separation method to separate solids with large buoyancy. In order to effectively guide the pulp and paper enterprises to apply for pollutant discharge permit, and to carry out pollution prevention and control from the technical and management service enterprises, the Guangxi Environmental Protection Research Institute and other departments have in-depth investigation of the production and operation of the pulp and paper enterprises in the jurisdiction, and compiled Guangxi Pulp and Paper Industry Pollution Prevention and Environmental Management Technical Manual, "Guangxi Pulp and Paper Industry Pollution Discharge Permit and Standardized Management Technical Guide" and "Guangxi Pulp and Paper Industry Special Treatment Plan" and other documents. At the same time, the ecological environment department of the autonomous region has also issued relevant policies, established a long-term mechanism, and improved the environmental supervision, testing and law enforcement capabilities of the management department. At present, Guangxi's pulp and paper enterprises have all carried out upgrading and transformation of non-sulphur bleaching technology and pollutant emission reduction work. Some enterprises such as the demonstration enterprise Nanning Sugar Co., Ltd. Pumiao Paper Mill have completed the chlorine bleaching in 2016. Technical upgrading, Tianyang Nanhua Paper Co., Ltd., Guangxi Laibin East Sugar Paper Co., Ltd., Guangxi Fengxue Luzhai Paper Co., Ltd. have successively applied to become demonstration paper mills, and will complete the upgrade of chlorine-free bleaching technology in June 2019. Reconstruction, other related companies will complete the transformation work before the end of 2019. A check valve is installed in the outlet line to prevent slurry backflow and reduce conveying efficiency. Since the first inspection and the process are not clear, it will not be implemented, let alone standard management. The squad leader, quality inspectors and management personnel shall determine the frequency of inspections according to the size of the variety. Generally speaking, it should be like this: After the end of this batch of orders, the returned and scrapped cardboard should be sorted according to the different conditions of the cardboard, and the waste quantity records should be recorded, and the returned products should be handed over according to the process leader transfer system. The team leader shall pass the certification, the team leader or the squad leader to make the judgment, that is to say, the completion inspection shall be carried out by the squad leader or the team leader.